A: The term “granite” is used to cover a group of related stones, all of which have their origin deep in the earth’s molten mantle. As this extremely hot liquid material rises and cools, it forms a crystalline, granular structure, hence the term granite. Granite and other granite-like stones are formed of hard minerals such as quarts, feldspar and mica, which are fused together into a very hard stone ideal for kitchen counters because its polish is resistant to household acids such as citrus and vinegar and is hard enough to resist scratching from knives and pots and pans.

A: Only if you want to ruin your good knives. Granite is harder than your knife blades and will dull them very quickly, if you use the countertop as a cutting surface. Always cut and chop on a wooden or plastic cutting board.

A: Like any solid surface, high impact blows can harm granite. Because of its crystalline structure, it can chip if subjected to sharp hard objects. Unsealed, granite can absorb stains such as oil, which can ultimately cause dark spots or discoloration. Heat from pots and pans or burning liquids will not affect granite under normal circumstances.

A: Granite, which is crystalline in structure, always has tiny pits – spaces between the various mineral crystals. You don’t see them on a larger piece because the overall appearance is polished and mirror-like. Granite sometimes has natural fissures as well, which may look like cracks, but are not structural defects and are a naturally occurring result of the immense heat and pressure which formed the granite eons ago. These characteristics are part of the natural beauty of stone and will not impair the function or durability of the material. A product of nature cannot be expected to look manmade.

A: The samples you see on the computer have been scanned and saved as digital images. The color tones may not be absolutely correct due to variations in computer systems, monitors and compression algorithms. Also, granite is a natural material with naturally occurring variations in color, tone, granularity, pattern, etc. These variations are expected and are the source of its natural beauty.

A: In general, no. All stone, however, is porous to some extent, but Granite has very little porosity. Most colors will never show any moisture. A few colors may show some moisture if exposed for a period of time. For example, a puddle of water left on the counter for 30 minutes for some colors, may show a dark spot when the water is wiped away. This spot will then dry up and no evidence will show. Only a few colors demonstrate this trait. Our granite has a sealer applied at the fabricator, however some customers prefer to apply a stone sealer (available at tile and granite shops) after the granite is installed.

A: Granite is formed by extreme heat and pressure combined beneath the earths crust. It can not be affected by heat from a cook top or frying pan. A lit flame placed under the granite will have no melting effect and will not leave any burned or scarred marks.

A: In only cases of sever abuse with a hammer or impact tool. A chip can be filled with a granite dust and epoxy mixture.

A: Because granite is a natural material and is mined from the quarry in blocks usually no more than 10? long, you will end up with seams. Also, because granite is sold in rectangular pieces, you may want to use seams to reduce your costs, such as in an ‘L’ shaped corner. The visibility of seams will depend on the granularity, color and pattern. A small, uniform grain (such as Regal Grey) will not be as apparent as a larger varied grain (such as Deer Island). A dark color (Spring Green) will be less apparent than a light color (Pine Green). A dramatic pattern with swaths of color (Kinawa, Paradiso) will show more seams than a uniform pattern (Dakota Mahogany). Most customers have found that the beauty of natural granite outweighs the concern of seams.

A: Seams are done where the granite joins with a smooth, straight cut During installation, a small bead of silicone is placed along the seam to seal it. Occasionally, in areas of stress or without sufficient support, the seams will be joined with epoxy, which must be supported temporarily until the epoxy cures.

A: No. You can’t burn it with ordinary use. Granite does not stain. The only caveat is that a few colors may absorb some moisture with prolonged contact. Usually, no evidence remains when the liquid is removed and the granite dries, but could be a problem with dark pigmented liquids. Although granite has a sealer applied at the fabricator, a stone sealer is recommended for all granite after installation.

A: No with the ordinary use. Granite is most susceptible to cracks during shipping and installation. Normal use will not overstress this durable material.